HueForge Layer Calculator

Convert physical millimeter heights directly into exact slicer layer numbers for HueForge color changes in Bambu Studio, OrcaSlicer, and PrusaSlicer.

⚡ Interactive Calculation Engine Active

Please enable JavaScript in your browser to run live computations, 2D envelope diagrams, and export PDF reports.

How to Use HueForge Layer Calculator

  1. Enter first layer height (e.g. 0.16mm) and subsequent layer height (e.g. 0.08mm).
  2. Enter target physical color change height in millimeters (from HueForge preview).
  3. View exact integer layer number to insert the color swap/pause command in your slicer.

What is the HueForge Layer Calculator?

A bridge calculator that converts HueForge continuous millimeter dimensions into discrete G-code layer indices for slicer pauses.

Formula Used

• Slicer Layer Index = 1 + ((Z_Height - First_Layer_Height) / Layer_Height)

Real-World Example

With 0.16mm base and 0.08mm steps, a color swap at Z = 1.04mm corresponds to: 1 + ((1.04 - 0.16) / 0.08) = 1 + (0.88 / 0.08) = Layer 12.

Accuracy and Limitations

Ensure your slicer's first layer height setting matches the value entered in the calculator.

Who It Is For

Anyone printing HueForge art on single-extruder or multi-material printers.

Frequently Asked Questions

How do I find which layer to change filament for HueForge?
Layer Number = 1 + ROUND((Target Swap Height in mm - First Layer Height in mm) / Subsequent Layer Height in mm).